Product Categories

Greenhouse Roll-Up Vent and Curtain Motors

AutoVent 24V vent motors roll greenhouse and high tunnel sides and vents up and down. Size the motor to the length of the vent it has to lift.

Showing all 4 results

Choose a motor by vent length

Size the motor to the length of the vent or roll-up side it has to lift. All four are 24V DC gear motors that turn at 3.6 RPM.

Motor Output shaft Rated vent length Amp draw
CMD-72 Single 75 ft 3 A
CMD-115 Single 115 ft 5 A
CMD-180 Dual 200 ft 7 A
CMD-402 Dual 350 ft 15 A

The CMD-72 is the most popular size for greenhouses and high tunnels.

Why 24 volts

24V motors run straight from AutoVent controllers that have built-in motor power, and you avoid running line voltage along the vent. For the trade-offs with 120V and 240V motors, see 24V vs 120V vs 240V curtain motors.

What runs the motor

  • A controller opens and closes vents automatically on temperature, humidity, rain and wind. VentStarPS, the Captain 8E PS and the Captain 10 PS power the motors directly. See greenhouse controllers.
  • A manual control box plugs into a 120V outlet and runs motors from switches, with no temperature control. It’s the most economical option.
  • A power supply panel connects 24V motors to most other vent controllers and adds manual override switches.

Manual control boxes and power supply panels are both in greenhouse motor control panels.

Installation notes

  • Limit switches set how far the vent opens and closes. Our install videos show how to set them.
  • On a controller’s built-in 24V power, keep motor wire to about 250 feet for a 200-foot vent, or 400 feet for vents of 80 feet or less. Ask us about longer runs.
  • Leave room for the motor: about 9.5 in deep by 12 in wide for the CMD-72 and CMD-115, 10.5 by 16 in for the CMD-180, and 12 by 14 in for the CMD-402.
  • Guide pipe brackets, cord guides and adapters for keder and steel pipe are available. Ask us for the right fit.

More reading: roll-up curtain motors for greenhouse vents, and what to do when an automatic vent opener stops working.

Size your motor

Which vent motor fits your vent

Match the motor to the length of the vent or roll-up side it has to lift. The CMD-72 is the most popular size for greenhouses and high tunnels.

  • 24V DC gear motors that turn at 3.6 RPM
  • Limit switches set how far the vent opens and closes
  • Order the motor only, with a creeper, with a wall mount, or as the standard package with a cord guide and creeper
Specifications

Greenhouse vent motor specs

 CMD-72CMD-115CMD-180CMD-402
Vent lengthUp to 75 ftUp to 115 ftUp to 200 ftUp to 350 ft
Output shaftSingleSingleDualDual
Shaft size0.76"0.76"0.86"0.86"
Torque24 ft-lbs66 ft-lbs89 ft-lbs173 ft-lbs
Speed3.6 RPM3.6 RPM3.6 RPM3.6 RPM
Amp draw3 A at 24V DC5 A at 24V DC7 A at 24V DC15 A at 24V DC
Clearance9.5 in deep, 12 in wide9.5 in deep, 12 in wide10.5 in deep, 16 in wide12 in deep, 14 in wide
Price

Why 24 volts? 24V motors run straight from AutoVent controllers with built-in motor power, and you avoid running line voltage along the vent. Compare 24V vs 120V vs 240V motors.

Power and control

What runs the motor

Every vent motor needs 24V power and something to tell it when to move. Pick one of these.

Check the motor power. Built-in motor power is 10 amps on the VentStarPS and Captain 8E PS, and 20 amps on the Captain 10 PS. Tell us which motors you're running and we'll confirm the power fits.
Already have a controller? If it doesn't have 24V motor power built in, a power supply panel connects it to AutoVent motors. Browse greenhouse power and control panels.
Installation

Brackets, adapters and wiring

Brackets and adapters fit the motor to your roll-up pipe. Ask us for the right fit when you order.

  • Guide pipe brackets. CMP-0001, sold as a set of 2.
  • Keder pipe adapters. CMP-0030 for 0.76" shafts and CMP-0031 for 0.86" shafts, in Norbco and FarmTek versions.
  • Steel pipe adapters. For 1" and 1.66" steel pipe, in 0.76" and 0.86" shaft sizes.
  • Wire length. On a controller's built-in 24V power, keep motor wire to about 250 ft for a 200-ft vent, or 400 ft for vents of 80 ft or less. Ask us about longer runs.
  • Rotation. Left motors turn clockwise to open (blue wire positive), and right motors turn counterclockwise (brown wire positive).
Setup guides. Wiring and limit switch guides are in Manuals & Guides. For how the whole system fits together, see greenhouse ventilation systems.
Frequently Asked Questions
Which size motor do I need?
Match the motor to the vent length: the CMD-72 up to 75 feet, CMD-115 up to 115 feet, CMD-180 up to 200 feet, and CMD-402 up to 350 feet.
Do I need a controller to run a vent motor?
No. A manual control box runs the motor from a switch. A controller adds automatic opening and closing on temperature, humidity, rain and wind.
Can I use these motors with my existing greenhouse controller?
Yes. A power supply panel connects most other vent controllers to 24V motors and adds manual override switches.